You are here

Home › Ultrasonics › Advanced / new developments in power ultrasonics › Thesis: Ultrasonic die system for metal forming

Thesis: References

  1. G M Chapman, J R Tyrer, "Investigation and design of container production process using ultrasonics to reduce friction". Final report on SERC sponsored grant GR/E09474, 1992.
  2. "Laser weld eliminates steel can top dome". Aerosol Age, pp48-49. 1987.
  3. W C Young, Roark's formulas for stress and strain. McGraw-Hill, sixth edition. 1989.
  4. J Perkins, "An outline of power ultrasonics". OEM design, 1972.
  5. P Vigoureux, Ultrasonics. Chapman & Hall Ltd., Catalogue no. 438/4. 1950.
  6. A Puskar, The use of high intensity ultrasonics. Elsevier Scientific publishing co., ISBN 0-444-99690-7. 1982.
  7. V S Pashchenko et al., "Upsetting of aerosol containers using ultrasound". Vestnik Mashinostroeniya, vol 63, iss 12, pp58-59. 1983.
  8. Y V Skachko, V S Pashchenko, P G Legant, "Selecting a press stroke rate with ultrasonic vibration of the blank". Kuznechno-Shtampovochnoe Provizvodstvo, pp31-33. 1985.
  9. N Lhermet & F Claeyssen, "Design of actuators based on biased magnetostrictive rare earth-iron alloys". Journal of intelligent material systems & structures, Vol 4, pp337-342. 1993.
  10. F Blaha, B Langenecker, "Elongation of zinc monocrystals under ultrasonic action". Die Naturwissenschaften, Vol 42, No 20, p556. 1955.
  11. G E Nevill, F R Brotzen, "The effect of vibrations on the static yield strength of a low-carbon steel". Proceedings of Am. soc. for testing materials, Vol 57, pp751-758. 1957.
  12. V P Severdenko, V V Klubovich, "Metal strain in an ultrasonic field". Doklady akad. nauk. B.S.S.R, Vol 5, pp15-16. 1961.
  13. B Langenecker, "The application of ultrasonic energy in the deformation of metals - Report of an informal symposium". Defense metals information center, pp5-7. 1963.
  14. B Langenecker, "Effects of ultrasound on deformation characteristics of metals". IEEE transactions on sonics and ultrasonics, Vol SU-13, No 1. 1966.
  15. B Langenecker, "Metal deformation in macrosonic fields". SAE transactions, Vol 74, pp499-505. 1966.
  16. R Pohlman, E Lehfeldt, "Influence of ultrasonic vibration on metallic friction". Ultrasonics, pp178-185. 1966.
  17. Z Polanski, M Radwanski, E Waresiak, "Influence of ultrasonic pulsations on friction in metal forming in metal forming operations". Obrobka Plastyczna, vol 22 pt 4. 1983.
  18. L Balamuth, "Ultrasonic motors fabricate metals and plastics". SAE journal, Vol 74, No 6, pp72-75. 1966.
  19. I Kristoffy, "Metal forming with vibrated tools". Transactions of the ASME, pp 1168-1174. 1969.
  20. O Izumi, K Oyama, Y Suzuki, "On the superimposing of ultrasonic vibration during compressive deformation of metals". Transactions of the Japan institute of metals, Vol 7, No 3, pp158-162. 1966.
  21. O Izumi, K Oyama, Y Suzuki, "Effects of superimposed ultrasonic vibration on compressive deformation of metals". Transactions of the Japan institute of metals, Vol 7, No 3, pp162-166. 1966.
  22. D A Tursunov, "Metal extrusion in an ultrasonic field". Kuznechno Shtamp. Proizv., No 5, pp10-11. 1964.
  23. J B Jones, "Ultrasonic metal deformation processing". International conference on manufacturing technology, pp 983-1006. 1967.
  24. W B Tarpley, "The application of ultrasonic energy in the deformation of metals - Report of an informal symposium". Defense metals information center, pp29-32. 1963.
  25. V P Severdenko, V V Klubovich, "Drawing a copper wire in an ultrasonic field". Doklady akad. nauk. B.S.S.R, Vol 7, No 2, pp95-98. 1963.
  26. A T Robinson, "The application of ultrasonic energy in the deformation of metals - Report of an informal symposium". Defense metals information center, pp12-13. 1963.
  27. C A Boyd, N Maropis, "The application of ultrasonic energy in the deformation of metals - Report of an informal symposium". Defense metals information center, pp13-15. 1963.
  28. C E Winsper, D H Sansome, "Fundamentals of "ultrasonic" wire drawing". Journal of the institute of metals, vol 97 pp274-280. 1969.
  29. C E Winsper, D H Sansome, "A study of the mechanics of wire drawing with superimposed ultrasonic stress". 10th MTDR Conference, 1969.
  30. C E Winsper, D H Sansome, "How ultrasonics aid wire drawing". Wire & wire products, pp39-44. 1969.
  31. D Oelschlagel, B Weiss, "Improved efficiency in wire drawing with ultrasound". Transactions of American society of metals, Vol 59, pp685-693. 1966.
  32. E Lehfeldt, "Wire drawing with superimposed ultrasonic vibrations". Wire, Issue 102, pp205-213. 1969.
  33. B Mainwaring, "The application of ultrasonic energy in the deformation of metals - Report of an informal symposium". Defense metals information center, pp 28-29. 1963.
  34. C A Boyd, H Kartluke, "The application of ultrasonic energy in the deformation of metals - Report of an informal symposium". Defense metals information center, pp24-28. 1963.
  35. C E Winsper, D H Sansome, "Application of ultrasonic vibrations to the plug drawing of tube". Metal forming, 1971.
  36. V P Kariyawasam, M J R Young, D H Sansome, "An experimental and design study fo fixed plug tube drawing with radial ultrasonic vibration of the die". Wire industry, 1979.
  37. D C Biddell, D H Sansome, "The deep drawing of cans with ultrasonic radial oscillations applied to the die". Ultrasonics International 1973 Conf Procs, p250. 1973.
  38. D C Biddell, "Ultrasonic deep drawing and ironing with the aid of flat and profiled radial resonators". Acoustica, vol 45. 1980.
  39. M Tisza, "The use of superimposed ultrasonic vibrations in deep drawing". Kohaszat, vol 116 pt 3 pp104-109. 1983.
  40. M Tisza, "Deep drawing experiments in ultrasonically vibrating tools". Kohaszat, vol 116, pt 3, pp104-109. 1983.
  41. M J R Young, D H Sansome, "An oscillatory deep drawing analogue". Proc 15th MTDR Conference, 1971.
  42. A W Smith, M J R Young, D H Sansome, "Preliminary results on the effect of ultrasonic vibration on an analogue of the deep drawing process". Ultrasonics International 1973 Conf Procs, 1973.
  43. A W Smith, D H Sansome, "An experimental investigation of the effect of blank holder vibrations on an analogue of the deep drawing process". Ultrasonics International 1975 Conf Procs, 1975.
  44. K A McQueen, D H Sansome, "An initial report on the drawing of strip through dies laterally vibrated in antiphase at 13 kHz". Ultrasonics International Conference Procs, 1979.
  45. "Ultrasonic metal forming - inching towards full shop status". Steel - The metalworking weekly, 1965.
  46. D H Sansome, "Recent developments in oscillatory metal working". Engineering, 1973.
  47. A E Eaves, A W Smith, W J Waterhouse, D H Sansome, "Review of the application of ultrasonic vibrations to deforming metals". Ultrasonics, 1975.
  48. J J Marklew, "Vibration assisted forming - the commercial breakthrough at last?". Machinery and production engineering, 1975.
  49. J Hollingum, "Research proves how good vibrations can draw tubes smoothly". The Engineer, 1976.
  50. D C Biddell, D H Sansome, "The development of oscillatory metal drawing equipment - an engineer's view". Ultrasonics, 1974.
  51. G R Dawson, C E Winsper, D H Sansome, "Application of high and low frequency oscillations to the plastic deformation of metals". Metal forming, 1970.
  52. D H Sansome, "Oscillatory metal working research at the university of Aston in Birmingham". Proc 1st Intl Sympm in high power ultrasonics, 1978.
  53. "Ultrasonic consistency". OEM Design, pp46-49. 1988.
  54. J P Lorimer, T J Mason, "Sonochemistry. Part 1 - The physical aspects". Chemical society review, Vol 16, pp239-274. 1987.
  55. J V Sinisterra, "Application of ultrasound to biotechnology: an overview". Ultrasonics, Vol 30, No 3. 1992.
  56. J P Perkins, "Power ultrasonic equipment for sonochemistry research". Ultrasonics, Vol 25. 1987.
  57. "Deburring by ultrasonic means". Tooling, Vol 33, No 1, pp12-15. 1979.
  58. E A Neppiras, Ultrasonic machining (Reprinted from Modern workshop technology - Part 2). Cleaver Hume Press Ltd,
  59. A I Markov, Edited by E A Neppiras, Ultrasonic machining of intractable materials. London Iliffe books Ltd, 1966.
  60. "Ultrasonic assembly of thermoplastic mouldings and semi-finished products". German Electrical Manufacturers association (ZVEI),
  61. U W Rische, F Abel (editors), "Ultrasonics in plastics joining technology". Herfurth GMBH, D-2000 Hamburg 50, Beerenweg 6-8. 1981.
  62. A Jagota, P R Dawson, "The influence of lateral wall vibrations on the ultrasonic welding of thin-walled parts". ASME transactions, Vol 109, pp140-147. 1987.
  63. J Devine, "Joining metals with ultrasonic welding". Machine design, pp91-95. 1984.
  64. J Tsujino, T Ueoka, M Takahashi, T Yanagiha, H Suzuki, T Horikoshi, "Studies on ultrasonic butt welding of aluminium and copper plates". Ultrasonics International Conf. Procs. 1985.
  65. J Tsujino, M Yabuzaki, T Ueoka, M Ishii, H Ishiwata, M Nagura, M Kobayashi, "Studies on ultrasonic vibration press of powder with a complex vibration die and longitudinal vibration punches". Ultrasonics International, 1985.
  66. J S Schoenwald, P M Beckham, R A Rattner, B Vanderlip, B E Shi, "Exploiting solid state ultrasonic motors for robotics". IEEE 1988 Ultrasonics symposium, pp513-517. 1988.
  67. R LeLetty, F Claeyssen, P Wendling, B Hamonic, R Bossut, "Analysis of an ultrasonic piezoelectric motor using numerical modelling". Journal of intelligent materials, systems and structures, Vol 4, No 3, pp428-431. 1993.
  68. P T Gough, J S Knight, "Wide bandwidth, constant beamwidth acoustic projectors: a simplified design procedure". Ultrasonics, Vol 27, pp234-238. 1989.
  69. S Soderberg, S Nikoonezhad, K Salama, O Vingsbo, "Accelerated fretting wear testing using ultrasonics". Ultrasonics, Vol 24, pp348-353. 1986.
  70. A Puskar, "Ultrasonic fatigue testing equipment and new procedures for complex material evaluation". Ultrasonics, Vol 31, No 1, pp61-67. 1993.
  71. E A Neppiras, "New materials for the detection and excitation of vibrations". Journal of physics E: Scientific instruments, Vol 6, pp952-962. 1973.
  72. K Uchino, "Electrostrictive actuators: Materials and applications". Ceramic bulletin, Vol 65, No 4, pp647-652. 1986.
  73. R R Whymark, "Magnetostrictive transducers with mechanical loads". Acoustica, Vol 6, pp 277-287. 1956.
  74. T Shelley, "Ultrasonic forming comes of age". Eureka, 1985.
  75. T W Rees, D J Rippon, "The application of ultrasonic vibrations in tube drawing". The Metals society conf. procs. - Developments in the drawing of metals, pp132-140. 1983.
  76. T Wearden, "Resonant control of ultrasonic drawing". Control systems, pp32-35. 1987.
  77. Ultrasonic generator series SG-22. Telsonic Ultrasonics, Telsonic UK Ltd. 8 Nuffield Ind. Est. Poole. 1987.
  78. R M Sonkin, "Microwave technology used to develop a solid state high power generator for ultrasonics". Ultrasonics, pp25-28. 1976.
  79. M J R Young, C E Winsper, D H Sansome, "The effect of tool attachment on the resonant characteristics of ultrasonic waveguides". Applied acoustics, vol 3, pp217-224. 1970.
  80. M J R Young, C E Winsper, D H Sansome, "Radial mode vibrators for oscillatory metal forming". Applied acoustics, pp299-308. 1970.
  81. M J R Young, C E Winsper, D H Sansome, "The design of high intensity radial vibrators for metal working applications". Journal of Physics D:Applied physics, vol 4. 1971.
  82. J P Den Hartog, Mechanical vibrations. McGraw-Hill Book Co (library no. 55-11927), pp165-167.
  83. S Timoshenko, Vibration problems in engineering (3rd edition). Van Nostrand Co. (library no. 54-10381), pp425-430. 1955.
  84. R D Blevins, Formulas for natural frequency and mode shape. Van Nostrand Reinhold Co. (library no. 79-556), pp203-207, 246-247, 296-305, 426-433. 1979.
  85. G M L Gladwell, D K Vijay, "Natural frequencies of free finite-length circular cylinders". Journal of Sound and Vibrations, Vol. 42, No. 3, pp387-397. 1975.
  86. J R Hutchinson, S A El-Azhari, "Vibrations of free hollow cylinders". ASME journal of applied mechanics, Vol 53, pp641-646. 1986.
  87. S A El-Azhari, "Vibrations of free hollow circular cylindrical bodies". University of California at Davis, PhD thesis. 1984.
  88. P L L M Derks, "The design of ultrasonic resonators with wide output cross-sections". Eindhoven university of technology, PhD thesis. 1984.
  89. C J Smithells (editor), Metals reference book. Butterworths & Co Ltd., 5th edition (ISBN 0 408 706 27 9) pp980-997. 1976.
  90. J Woolman, R A Mottram, The mechanical and physical properties of the British Standard En steels (volume 3). Pergamon Press, Library of congress no. 63-21774. 1968.
  91. A M Staines, "Trends in plasma-assisted surface engineering processes". Heat treatment of metals, 1990 vol 4, pp85-92. 1990.
  92. "Ferro-titanit. Machinable and hardenable hard material alloys - the solution to your wear problems". Sales literature - Thyssen Edelstahlwerke AG, Publication 1153/3 E. 1985.
  93. I Wilson, "Engineering applications of sialons". Advanced materials technology international, 1990.
  94. Syalon 101 data sheet. Sales literature - Lucas Cookson Syalon Ltd., Publication no. 4191A. 1984.
  95. The properties of aluminium and its alloys. Aluminium Federation, 8th edition. 1980.
  96. "RMI 6Al-4V". Sales literature, (c) Reactive Metals Inc. 1967.
  97. B H Hanson, "Present and future uses of titanium in engineering". Materials and design, Vol 7, No 6, pp301-307. 1986.
  98. R D Adams, "The damping characteristics of certain steels, cast irons and other metals". Journal of sound and vibration, Vol 23, No 2, 199-216. 1972.
  99. R B Bhagat, M F Amateau, E C Smith, "Damping behavior of mechanically alloyed aluminium and aluminium matrix composites". The international journal of powder metallurgy, Vol 25, No 4, pp311-316. 1989.
  100. C A Updike, R B Bhagat, M J Pechersky, M F Adams, "The damping performance of aluminium-based composites". Journal of materials, pp42-46. 1990.
  101. H O Fuchs, "The effect of self stresses on high cycle fatigue". Journal of testing and evaluation, pp168-173. 1982.
  102. British standard code of practice for safety of machinery. British standards institution, BS5304:1988. 1988.
  103. C R Hill, "The possibility of hazard in medical and industrial applications of ultrasound". British journal of radiology, Vol 41, No 488, pp561-569. 1968.
  104. W I Acton, "The effects of airborne ultrasound on humans". Ultrasonics, pp124-128. 1974.
  105. C Wiernicki, W J Karoli, "Ultrasound: biological effects and industrial hygene concerns". American industrial hygiene assoc. journal, Vol. 46, pp488-496. 1985.
  106. Ansys(R) Engineering analysis system. Swanson analysis systems inc., PO Box 65, Johnson Rd, Houston, Pennsylvania.
  107. K-J Bathe, Finite-element procedures in engineering analysis. Prentis-Hall, 1982.
  108. P C Kohnke, Ansys(R) theoretical manual. Swanson analysis systems inc., PO Box 65, Johnson Rd, Houston, Pennsylvania. 1987.
  109. R J Guyan, "Reduction of stiffness and mass matrices". AIAA journal, Vol 3, No 2, p380. 1964.
  110. Ansys User's Manual for Revision 5.0. Swanson analysis systems inc., PO Box 65, Johnson Rd, Houston, Pennsylvania. 1992.
  111. J P Den Hartog, Mechanical vibrations. McGraw-Hill Book Co (library no. 55-11927), pp93-106.
  112. S Timoshenko, Vibration problems in engineering (3rd edition). Van Nostrand Co. (library no. 54-10381), pp210-220. 1955.
  113. M D Waller, "Vibrations of free circular plates". Physics society procs, Vol 50, pp70-86. 1938.
  114. G M Chapman, M Lucas, "Frequency analysis of ultrasonically excited thick cylinders". Modern practice in stress & vibration analysis conf. procs., Inst. of Physics. 1989.
  115. M Lucas, "Measurements using an FFT analyser on the ultrasonic forming test rig". Internal report, 1988.
  116. J P Perkins, Instruction manual for admittance-impedance circle plotter model 8410. Sonic Systems, 18 Silverless St, Marlborough, Wilts. 1986.
  117. M C Shellabear, J R Tyrer, "Three-dimensional vibration analysis using electronic speckle pattern interferometry (ESPI)". Laser Technologies in Industry Conf. Procs., SPIE Vol 952. 1988.
  118. M C Shellabear, J R Tyrer, "Three dimensional analysis of volume vibrations by electronic speckle pattern interferometry". Stress and vibratons Conf. Procs., SPIE Vol 1084, pp252-261. 1989.
  119. M C Shellabear, "Report on the trial of a pulsed laser ESPI system at CMB technology". Internal report, 1990.
  120. M C Shellabear, "Application of ESPI to the vibration analysis of ultrasonic tooling - A report on the 1st year of research". Internal report, 1988.
  121. J N Petzing, J R Tyrer, "Shearing interferometry for power ultrasonic vibration analysis". SPIE conference procs., Warsaw, Poland. 1994.
  122. M K Kwak, "Vibration of circular plates in contact with water". Transactions of ASME, Vol 58, pp480-483. 1991.
  123. Codebook prototype. Issco Inc. Southern California,
  124. P Porucznik, C F Cheers, "Maintaining a Preferred Vibration Mode in an Annular Article". UK patent, GB 2230724. 1990.
  125. P Porucznik, C F Cheers, "Method and apparatus for reducing the mouth of an annular article". UK patent, GB 2206304. 1987.
  126. G M Chapman, "Ultrasonic fatigue". University of Nottingham, Phd thesis. 1966.

Copyright ©1999-2016 PowerUltrasonics.com. All rights reserved. Powered by Drupal.